Z Automotive Tazer Mini Plug-N-Play Programmer/Tuner for Wrangler JL/Gladiator

Description


Z Automotive Tazer Mini Plug-N-Play Programmer/Tuner for Wrangler JL/Gladiator
PART NUMBER:
JL-TAZER-MINI
BRAND:
Z Automotive
DESCRIPTION
Tazer JL Mini is to be an essential tool for owners of the 2018+ Wrangler JL and Jeep Gladiator. All engine and transmission variations supported, including export models.
Simple, plug-in installation – simply unplug the SGW module and plug the Tazer JL Mini in its place. Located above the OBD2 Diagnostic connector.
Features are all accessed using the dash display, using steering wheel buttons to navigate the menus.
Tazer JL Mini features can be broken into two categories;
Vehicle Settings –
which are changes made to the Jeep like tire size, gear ratios, or change settings to accommodate other upgrades or modifications. These changes will continue to operate after the Tazer JL Mini is unplugged.
Live Functions –
which are functions the Tazer JL Mini performs live, only while plugged in.
Vehicle Settings:
Change Tire Size
Change Gear Ratio
Change Transfer case LOW ratio
Enable/Disable TPMS system
Change TPMS pressure warning limit front/rear (25psi-85psi)
Enable/Disable Backup camera
Enable/Disable Cargo Camera input (8.4 Uconnect only)
Enable/Disable CD (wired audio) input
Enable/Disable TravelLink/XM traffic&weather
Change Daytime Running Lights (DRL) region (type)
Change DRL location
Enable/Disable DRL Dropout function
Enable/Disable factory fog lights
Enable/Disable Fog Light Dropout (when Fogs shut off while High Beams are on)
Enable/Disable Factory Halo lights (including BCM output for adding Halo’s)
Enable/Disable One-touch lane change
Change Headlight type (std/LED)
Change Fog light type (std/LED)
Change Taillight type (std/LED)
Change Front Turn Signal type (std/LED) – supports aftermarket LED lights too
Enable/Disable Trailer Tow setting
Enable/Disable Aux Button settings
Enable/Disable Blind Spot detection (if hardware added or removed)
Enable/Disable/Change Parksense configuration
Disable Electronic Sway Bar (if removed from vehicle)
Disable Front Axle Disconnect module for axle swaps
Disable Front and Rear Lockers for axle swaps
Disable Electronic Steering Pump for hydraulic steering conversions
Change cluster splash screen Wrangler/Sahara/Rubicon
Change HVAC controls setting to allow use of dual zone controls on single zone Jeep (for those upgrading the 5″ radio)
Enable HomeLink for those that add the Homelink Visor and harness
Enable Proximity Entry for those that add the door handles and harnesses
Enable 115v bed outlet for those that add the hardware on Gladiators
Enable Automatic Headlamps (If hardware added)
Enable/Disable PANIC button on remote
One-touch return-to-stock – Quick “unmarry” function returns all vehicle settings back to stock.
Live Functions:
AutoStopStart disable – remembers last state of the auto stop start system and will set it for you the next time you start the vehicle
AutoTracKill – remembers last state of traction control system and will set it for you the next time you start the vehicle
Can disconnect sway bar in 2WD up to 30mph (any speed if button mapped SwayKill is used)
Can use backup camera and added cargo/front/undercarriage camera or media player at any speed
TurnCAM – automatic backup camera when turn signals are used (8.4 uconnect only)
Dark Mode- Turns off all exterior lighting and dash/radio/shifter lights while parked with engine running.
3rd Brake Flash – Set rate and number of flashes to pulse the 3rd brake light when brakes are applied for increased visibility
Light Show mode – 6 preset and 3 make-your-own Light shows that flashes all the exterior lights, perfect for car shows/first responders/off-road visibility. Control from Key Fob or steering wheel buttons. Can be enabled for in-motion use for parades, off-road and legal police/EMS.
Axle Locker control (Rubicon) – Engage lockers in 2WD and 4Hi on demand.– TC Kill – Tuns off traction control, stability control and ABS.
Hood Alarm – When the vehicle theft alarm is armed, monitors hood activity and will sound the alarm and flash light shows if opened.
Cooldown mode: Turn engine fans on demand when the ignition is on, engine not running
Line Lock: Can lock front brakes for an easy burnout
Rock Crawl: Can lock all four brakes by pressing steering wheel buttons to hold the vehicle still, especially helpful when off-road.
Winch Mode: Raise idle to 2000 RPM with a simple button press.
Button Mapping: Use cruise up, down and right buttons as quick-access to some of Tazer JL’s functions, when cruise control is off.
Display DTC’s – Shows the diagnostic codes that’s making the check engine light come on.
Clear CELs – Reset that pesky check engine light. Good when you have mods that set the light and you know exactly why.
0 to 30 and 0 to 60 Timers – Displays 0-30 or 0-60 times on EVIC display
Automatically blanks license plate lights when in Reverse on Gladiators, to remove glare on the backup camera at night.
Vacuum/Boost gauge – Watch real-time Manifold Pressure, great for boosted/turbo applications
Firmware updates – the new firmware is available periodically, always free!
CUSTOMER SERVICE
SHIPPING
INT'L SHIPPING
RETURNS/EXCHANGES
Customer Service
Our goal is to provide 100% customer satisfaction.
Our business hours are listed below. If you are emailing or calling us outside of our normal business hours, we will respond back to you as quickly as possible or on the next business day.
Customer Service:
Mon. - Fri. 9:00AM - 5:30PM CST
Sat. 8:00AM - 11:00AM CST
Returns:
Mon. - Fri. 8:00AM - 4:30PM CST
Sat. 8:00AM - 11:00AM CST
We will accept returns up to 30 days from the delivery date.
Shipping
Handling time is based on the availability of the item. Your item will ship in 1-30 business days. Please view the handling time stated for each item under the shipping and payments tab.
Tracking information will be posted to your sale as soon as it is available.
TO VIEW YOUR TRACKING NUMBER:
1) Log into your eBay account
2) Navigate to the My Account tab on the upper right side of your screen
3) Click on your eBay won/purchase items
4) Your tracking number can be viewed from this summary screen
If for some reason your tracking number has not been posted to your sale after your stated handling time, feel free to email or contact us to find out where your item is. Also, please note that if you order more than one item, the items may ship from different locations and arrive at different times.
Although ?Free Shipping? is advertised, there is still a cost involved with shipping products. The cost of shipping is included in the price of the item.
International Shipping
You hereby acknowledge and agree that you may be subject to additional duties, charges, fees, costs and taxes, which are levied once a shipment reaches its destination. These charges are borne by you; we have no control over these charges and cannot predict what they may be. Please be advised that Customs policies vary widely from province to province. You should contact your local customs office for further information. Additionally, when ordering from Trends Auto, you are considered the importer of record and must comply with all laws and regulations.
Furthermore, your privacy is important to us, and we know that you care about how information about your order is used and shared. We would like our customers and those customers shipping products internationally to be aware that cross-border shipments are subject to opening and inspection by customs authorities.
Also, we may provide certain order, shipment and product information, to our international carriers and such information may be communicated by the carriers to customs authorities in order to facilitate customs clearance and comply with local laws.
Returns & Exchanges
We do accept returns and exchanges at Trends Auto. Any returned merchandise must be in its original packaging and condition. There will be a 50% re-stocking fee applied for any items returned that are not in its original packaging and condition, or if they are returned without an RMA number.
Returns may be accepted on installed items with a 50% restocking fee.
Any electronics that are returned back used or in VIN lock condition will have a &dollar150 charge assessed along with any other additional fees that would apply.
Please note the following:
Unless our company is in error or the listing is in error, the customer is responsible for paying return shipping costs and a 20% restocking fee.