-40%
Eco OBD2 Benzine Economy Fuel Saver Tuning Box Chip For Petrol Car Gas Saving
$ 3.26
- Description
- Size Guide
Description
Installation and Calibration 1* Pull the Car Key out from the ignition. 2* Find OBD2 connector(*) in your car and Plug in NitroOBD2 Chip Tuning Box 3* Insert the key into the ignition and twist the key to the first stage. (Do not start the car) 4* Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (NitroOBD2 Chip Tuning Box will communicate and establish connection with ECU) 5* Start up the engine. 6* NitroOBD2 Chip Tuning Box will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus NitroOBD2 Chip Tuning Box will adjust itself to match your car perfectly for more fuel saving.Store category
Sign Up Now !
You may also like
Eco OBD2 Benzine Economy Fuel Saver Tuning Box Chip For Petrol Car Gas Saving
Product Description
Note:
Just fit for Benzine Cars
Description:
NitroOBD2 Chip Tuning Box works based OBD2 protocols as remaping the Car's computer ECU. After driving 200 km road total, NitroOBD2 adjusts itself to the car, according to the drivers' habits and always keeps remaping the ECU to increase the performance of engine.
What does NitroOBD2 make?
According to your driving habits, NitroOBD2 makes new map in the car's computer ECU to increase the performance of your car. As you driving much more KM/Mile, it renews the map. Thus it keeps the vehicle's power and torque increasing.
What is NitroOBD2 Chip Tuning Box?
NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.
When it plugged into OBD2 connector, NitroOBD2 receives the information from the car computer ECU. With the received data from ECU,NitroOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.
NitroOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
NitroOBD2 finds out the hidden power of your car. NitroOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
NitroOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug NitroOBD2 from OBD2 connector.
NitroOBD2 finds out the hidden power of your car.
- Up to 35% more power
- Up to 25 % more torque
NitroOBD2 is very easy to use.
Plug NitroOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on.
NitroOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle,there might not be a need to make an additional adjustment. NitroOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving,and then NitroOBD2 adjusts itself to match your car perfectly.
NitroOBD2 works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map.
The main difference between NitroOBD2 Chip Tuning Box and Remapping tuning methods is that NitroOBD2 Chip Tuning Box is easily removable,and after unplug you go back to the factory settings. EcoOBD2 is the cheap and safe type of tuning.
Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it.
NitroOBD2 is equipped with the engine protection function and 100% safe for your car engine.
NitroOBD2 produced on the printed circuit board in SMD technology. NitroOBD2 Chip Tuning Boxes are high quality.
Installation and Calibration
1* Pull the Car Key out from the ignition.
2* Find OBD2 connector(*) in your car and Plug in NitroOBD2 Chip Tuning Box
3* Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4* Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (NitroOBD2 Chip Tuning Box will communicate and establish connection with ECU)
5* Start up the engine.
6* NitroOBD2 Chip Tuning Box will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus NitroOBD2 Chip Tuning Box will adjust itself to match your car perfectly for more fuel saving.
Does your car have OBD2 connector?
On-Board Diagnostics, or "OBD," is a computer-based system built into all 1996 and later light-duty vehicles and trucks, as required by the Clean Air Act Amendments of 1990.
OBD systems are designed to monitor the performance of some of an engine's major components including those responsible for controlling emissions.
OBD2 necessarily for cars:
- Sold after January 1, 1996 in the USA
- Sold after January 1, 2001 in the European Union
- With gasoline engine sold after January 1, 2003
Where located OBD2 connector in your car?
1 Driver's side, underneath dasboard, in the area under the steering column,
2 Driver's side, underneath dasboard,between the driver-side door and steering column area
3 Driver's side, underneath dasboard, between the steering column area and the center console
4 Driver's side, dashboard instrument/gauge area, between the steering column and center console
5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column
6 Center console, vertical surface left of vehicle centerline
7 Center console, vertical surface right of vehicle centerline or on passenger side of center console
8 Center console, horizontal surface in front passenger area.
Package Include:
1x EcoOBD2 Chip Tuning Box Interface
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
1.We accept PayPal only.
2.Please leave note for your special request (e.g. Colors or Size) in ebay note when you pay the order.
Delivery details
1.Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2.If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 30 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3.Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
Terms of sales
1. All our product share 1-year warranty. If incorrect or defective item when you receive it, plz contact us via eBay message before you return the item back. We promise no extra charges, we will pay return shipping fee and arrange replacement or FULL REFUND ASAP.
2. If buyer want to return the product without any problem, buyer should pay return shipping fee. The item must be returned in good condition and its original packaging and accessories, never installed or mounted. We will not accept returns after 30 days of delivery date.
Return:
Return address: Zebra Logistics Inc.+RZN+BBZQ
114 Melrich Road, STE E, Cranbury, NJ 08512
Return dealine: After 30 business days we can no longer accept a return.
About us
Car-discover
the professional carbon fiber car parts manufacturer, always perseveres in manufacturing and supplying the best carbon fiber car parts for global customers. We can solve your following painful points in your carbon car parts business! Ahacarbon insists on using the high-quality materials in carbon fiber car parts manufacturing, which guarantees that our carbon fiber car parts can satisfy our customers' different requirements.
Contact us
1.We are trying our best to explain all details of the products here! If you have any question, please feel free to contact us by Ebay message, and We will get back to you within 24-48 hours.
2.
Customer satisfaction is our NO.1 priority. If you are not happy with the item that you purchase, please contact us first.
We will try our best to solve the problem with you.
Please leave us a positive feedback if you receive the item.
Please do
not
leave negative or neutral feedback without any contact.If you haven't received item in 30 days, please contact us and we will arrange refund
.
We appreciate your business.
Happy Bidding & Have a nice day!
Feedback